(1) The electromagnetic vibrating feeder is generally mounted by hanging. The boom should be installed on a structure with sufficient rigidity. In order to reduce the lateral swing of the electromagnetic vibrating feeder, the suspension boom should be arranged to be outwardly opened by about 10°. For large feeders, a moving carriage should also be provided for the convenience of repairing and replacing the trough.

(2) The electromagnetic vibrating feeder should be installed as a whole, generally not allowed to be disassembled, and it is not allowed to consolidate any rigid attachment on the machine. When installing, leave a certain amount of space around the equipment to avoid collision with other equipment during work. Generally, the space in the longitudinal direction is at least 50 mm and the width direction is 25 mm.

(3) Electromagnetic vibrating feeder The tank body can be installed horizontally or obliquely. The feeding capacity is proportional to the downdip angle, but the downward dip angle is too large to cause material self-flow, and it is difficult to ensure the feeding accuracy. Therefore, it should be determined whether it is inclined upwards, downwards, or horizontally depending on the nature of the material.

(4) After the installation, the feeder should be horizontal in the horizontal state to avoid the material being offset to one side when the feeder is working, and to ensure that all the fastening bolts are tight.